The use of injection molding machines must be done in time for protection

- 2021-07-09-

As long as it is a machine and equipment, it will inevitably cause some abnormal failures during a long-term operation, and this is no exception for injection molding machines. If you want to better reduce the probability of failure during equipment use, companies and users need to do a certain amount of protection in time before actually using the injection molding machine

First, the pre-care work is to take care in advance, that is, when the problem does not occur, there will be targeted care. One of them is to reduce the downtime of the injection molding machine. This is for maintaining the stable performance of the injection molding machine. Conservation measures taken under consideration.

Second, during the long-term operation of the injection molding machine equipment, due to the need of operation, it will inevitably bring certain natural losses to its equipment or parts. In order to prevent this part of the natural losses from developing into more serious problems, operation The personnel need to overhaul it in time, and then replace it with a new workpiece.

Third, in addition to pre-care for the injection molding machine equipment itself, the operator can also enhance the maintenance effect through the use of related accessories, including the use of lubricating oil and the regulation of the working environment.

Fourth, if you are working under machinery and equipment, you should put a "under repair, do not turn the machine" sign on the repaired equipment. To repair machinery with wheels, use triangle irons to plug the wheels to prevent rolling. When lifting with a jack, the jack should be placed steadily. Find the raising tool before raising the machine or parts. It is strictly forbidden to use bricks, broken wood or other easily broken objects to stuff the pads.

In short, after long-term operation of the injection molding machine, various problems will inevitably occur. If it is not solved in time and effectively, it will cause greater losses. The occurrence and handling of these problems will inevitably have an adverse effect on the operation of the equipment, so we must take precautions in advance to avoid problems as much as possible. Therefore, it is usually possible to perform more pre-protection work on the equipment to minimize the loss of the machine during use and prolong the service life of the injection molding machine.