Standard EDM Wire Cut Machine DK-77100

Standard EDM Wire Cut Machine DK-77100

Our Standard EDM Wire Cut Machine DK-77100 is of competitive price, stable quality, energy saving. We do business on base of honesty & profession. We devote ourselves to expand the market in world wide. And we enjoy good reflection from the customers for the machines.

Product Detail

Standard EDM Wire Cut Machine DK-77100


1, Standard EDM Wire Cut Machine DK-77100 Introduction

EDM wire cut machine enjoys good reflection from the customers. Its body is the use of high-strength cast iron forming the base for the machine load-bearing parts. Integral structure, its body is used resin casting technology casting (walking wire on the use of this technology).


2, Standard EDM Wire Cut Machine DK-77100 Parameter (Specification)

Type

DK-77100

Size of worktable(mm)

1777*1118

Table travel(mm)

1000*1300

Max.workpiece thickness(mm)

800

Max taper angle(°)

F≤6 G≤60

Diameter of molybdenum wire(mm)

Φ0.10-Φ0.25

Power supply(Hz/V)

50Hz/220V±10% 50Hz/380V±10%

Drive of worktable

10 pats 5 phase driven by stepmotor

Single pulse machining accuracy(mm)

≤0.001

General machining accuracy(mm)

+-0.01

machining speed(mm²/min)

80-120

Optimal surfing roughness(μm)

Ra≤2.5

Overall power(kw)

<3

Weight of machine(kg)

6700

Max.weight of workpiece(kg)

4000

Machine tool outer diam.size(mm)

3200*3200*3000


3, Standard EDM Wire Cut Machine DK-77100 Feature And Application

It owns the feature & characteristics as follows,

1)automatic cutting tracking real-time retracing and display of machining trace and drawing of contour of workpiece is three dimensional.

2)automatic return of short circuit Power failure protection Automatic recording of machining trajectory Caller recovery

3)arbitrary shutdown End of stage Default program stop

4)check the content of any segment Modifiable Insert delete any program segment

5)automatic return of short circuit Power failure protection Automatic recording of machining trajectory Caller recovery

6)broken wire treatment: Automatic fault detection fuction of the system Automatic interruption of broken wire Go back to the cut point


4, Standard EDM Wire Cut Machine DK-77100 Detail

1)Casting all for casting castingHT200,casting Natural aging

2)X.Y shaft use Ball screw

3)Guideway Ball screw shield use fuii closure

4)Industrial control computer

5)80GHDD 232interface,UBS network card,1G memory

6)Input mode: the standard keyboard, mouse,UBS drive,network transmission


5, Standard EDM Wire Cut Machine DK-77100 Quality Qualification

The equipment according to the enterprise standard implementation. And the enterprise owns rich experience in field ofEDM Wire Cut Machine.


6, Technical and After-sales Service
The supplier the following technical and after-sales service commitment
1) English Technical files provided.
2) Machine tested before the delivery.

3) Technical support online service provided.

4) Consumable parts at reasonable price when replaced.


7, FAQ 

1) Delivery time: within 7 days if in stock. It is subject to confirmation.

2) Packing: simple package. It is subject to confirmation.

3) Trade Term: FOB, CFR, CIF, ect. It is subject to confirmation.

4) Default power system: 220V, 50Hz, 1 Phase


Remark:

All the information (including word, photo) above are only for reference. It is subject to confirmation. The company reserves the right to revise all information (including word, photo) above.



Hot Tags: Standard EDM Wire Cut Machine DK-77100,Suppliers, Buy, China, Cheap, Price, Quality

Send Inquiry

Related Products